Mechanical properties and transition temperatures of crosslinked-oriented gelatin

 This second part of a systematic study of the properties of crosslinked-oriented gelatin involves the effects of orientation and water content on the glass transition temperature T _g and on the melting behavior. The samples were the same as those in the preceding study, and their transition temperatures were determined by both differential scanning calorimetry and dynamic mechanical thermal analysis. The crosslinked gelatin which had been room-conditioned showed two transition temperatures: the lower one was attributed to T _g of the water-plasticized gelatin, and the higher one was interpreted as T _g of dried gelatin superimposed by melting. A rather unusual situation arose because of the fact that the T _g and melting temperatures T _m (217 and 230 ^°C, respectively) are so similar. Using water as plasticizer not only decreases T _g but produces imperfect crystallites which melt below the T _g of the system. The presence of the amorphous phase in the glassy state would presumably make it essentially impossible to define a melting point or crystallization temperature in the normal manner, as an equilibrium between crystalline and amorphous phases. Received: 8 October 1996 Accepted: 2 November 1995     

Nuclear‐Spin Polarization in Electron‐Transfer Reactions of Amines

Chemically induced dynamic nuclear polarization (CIDNP) observed during electron transfer (ET) reactions of tertiary amines such as DABCO ( 1 ) or Et₃N ( 2 ) with a wide range of electron acceptors support the involvement of amine radical‐cations (e.g., 1^{. +} or 2^{. +} ) as key intermediates. Radical ions such as 2^{. +} may be deprotonated, generating neutral aminoalkyl radicals (e.g., 2^. ). When generated by reaction with an electron acceptor of energetically low triplet state such as naphthalene (¹Naph*), the resulting pair 2^{. +} /Naph^.? reacts mostly by reverse electron transfer (RET) from triplet pairs populating the naphthalene triplet state.     

HIPS／PP熔融反应共混及其动态力学性质

研究了高抗冲聚苯乙烯（HIPS）／聚丙烯（PP）共混物在过氧化二异丙苯（DCP）存在下的熔融反应过程及其动态力学性质．HIPS在DCP存在下以聚苯乙烯（PS）的降解为主，伴随着聚丁二烯（PB）的交联和接枝，PP在DCP存在下以降解为主，HIPS／PP在DCP存在下以PP同HIPS的反应接枝为主，这种原位生成的增容剂显著地改善了HIPS／PP两组份间的相容性，其分子运动特征较前两者发生明显变化，PS的Tg下降，PB和PP的Tg升高．     

Normalized Dynamic Characterization and Application of Multiple Heat Storage Materials Based on Standard Thermal Resistance北大核心CSCD

基于标准热阻和能量流法,推导出储热材料与换热流体的瞬态换热热阻,通过类比电路分析法,获得了储热-换热过程的瞬态热量流模型及动态响应时间常数。进一步引入节点温度,重新定义换热热阻,获得了储热与换热过程耦合的三阶电路瞬态热量流模型,求解得到了加热、储热和释热三类时间常数,可用于协同表征储热材料中储热与释热的快慢程度,从而实现了多类储热材料的归一化动态表征。通过数值模拟验证与应用对比分析,发现基于多时间常数的归一化动态模型用于表征储热材料的动态特性是可行的,可直接对不同换热、储热材料进行对比分析。案例分析发现与固体储热材料换热时,液态金属的动态换热能力优于熔融盐,而相比于水蒸气和CO₂,空气与陶瓷材料换热能更快达到稳态。     

考虑油膜动态过程的海上溢油应急物资调度优化

针对溢油应急响应中海上油膜所具有的动态特性,综合考虑需求点的时变物资需求、运输网络的不确定性以及物资调度决策与外部决策环境之间的相互作用关系之后,构建了效率目标与成本目标相结合的多目标海上溢油应急物资调度优化模型。根据模型的特点,提出了一种基于鲸鱼算法的求解方法。该算法利用非线性收敛因子克服了算法后期易陷入局部最优的不足,同时还引入小生境共享机制以确保解的多样性。最后,通过仿真案例对模型与算法的有效性与可行性进行了验证。结果表明,该方法可以为决策者提供高质量的决策支持。     

Molecular dynamics of cyclic and linear poly(dimethylsiloxanes)

Dielectric spectroscopy (10^–1 Hz to 10⁷ Hz) has been employed to study the molecular dynamics of a series of cyclic and linear polydimethylsiloxanes (PDMS) of various molecular weights ranging from 300 to 10 000 g/mol in the temperature range above the glass transition (from 130 K to 190 K). The observed -relaxation depends strongly on both molecular weight and structure of the samples. For linear PDMS oligomers, the -relaxation shifts towards lower temperatures with decreasing molecular weight in good accordance with the Fox-Flory-model. Cyclic PDMS reveals a qualitatively different molecular weight dependence: for a given temperature the -relaxation time increases with decreasing ring length, but has a maximum for small oligomers (degree of polymerizationn6). The shape of relaxation curves and, with it, the relaxation time distribution is independent from length and architecture of the chains The observed experimental findings are in qualitative agreement with dynamic Monte-Carlo simulations.Dedicated to Prof. E.W. Fischer on the occasion of his 65th birthday Fast macht' das WLF ihn krank, jetzt raucht er wieder, Gott sei Dank! (frei nach Wilhelm Busch)     

Dynamic structure factor in a random diffusion model

Let {X _t:0} denote random walk in the random waiting time model, i.e., simple random walk with jump ratew ^–1(X _t), where {w(x):x^d} is an i.i.d. random field. We show that (under some mild conditions) theintermediate scattering function F(q,t)=E ₀ (q^d) is completely monotonic int (E ₀ denotes double expectation w.r.t. walk and field). We also show that thedynamic structure factor S(q, w)=2 ₀ cos(t)F(q, t) exists for 0 and is strictly positive. Ind=1, 2 it diverges as 1/||^1/2, resp. –ln(||), in the limit 0; ind3 its limit value is strictly larger than expected from hydrodynamics. This and further results support the conclusion that the hydrodynamic region is limited to smallq and small such that ||D |q|², whereD is the diffusion constant.     

Hydraulic conductivity of rock fractures

The flow of a single-phase fluid through a rough-walled rock fracture is discussed within the context of fluid mechanics. The derivation of the cubic law is given as the solution to the Navier-Stokes equations for flow between smooth, parallel plates - the only fracture geometry that is amenable to exact treatment. The various geometric and kinematic conditions that are necessary in order for the Navier-Stokes equations to be replaced by the more tractable lubrication or Hele-Shaw equations are studied and quantified. In general, this requires a sufficiently low flow rate, and some restrictions on the spatial rate of change of the aperture profile. Various analytical and numerical results are reviewed pertaining to the problem of relating the effective hydraulic aperture to the statistics of the aperture distribution. These studies all lead to the conclusion that the effective hydraulic aperture is less than the mean aperture, by a factor that depends on the ratio of the mean value of the aperture to its standard deviation. The tortuosity effect caused by regions where the rock walls are in contact with each other is studied using the Hele-Shaw equations, leading to a simple correction factor that depends on the area fraction occupied by the contact regions. Finally, the predicted hydraulic apertures are compared to measured values for eight data sets from the literature for which aperture and conductivity data were available on the same fracture. It is found that reasonably accurate predictions of hydraulic conductivity can be made based solely on the first two moments of the aperture distribution function, and the proportion of contact area.     

聚苯醚砜在二甲基甲酰胺中稀溶液性质的研究(Ⅱ)

本文用广角及准弹性光散射法测定了聚苯醚砜各级分在DMF中和在θ溶剂中25℃时的均才半径R_G,第二维利系数A_2,流体力学半经R_H,扩散系数D_O,扩散系数的浓度依赖性k_F以及这些参数与分子量M的关系。它们的结果如下R_G=0.031MO~(0.55) D_O(θ)=0.906×10~(-4)M~(0.5) D_0=1.445×10~(-4)M~(0.55)A_2=0.033M~(-0.35) k_D(θ)=0.5M~(0.34) k_D=2.3×10~(-6)M~(1.36)α_H=R_H/R_H(θ)=0.63M~(0.05)R_H(θ)=0.0299M~(0.5)R_H=0.0188M~(0.55) 作者讨论了静态与动态两种高分子尺寸之间的关系;三种溶胀因子α_η和、α_H、α_G之间的关系;以及摩擦系数的浓度系数k_F与流体力学体积V_H之间的关系。它们的结果满足下面各关系式: R_H/R_G=[π(v+1)(2v+1)/3]~(1/2)(2-v)(1-v)/2, α_η~3=α_(G)~2α_H, k_F=1.2A_2M+N_AV_H/M,K_F(θ)=N_AV_H/M     

Analysis of grid file algorithms

Grid file algorithms were suggested in [12] to provide multi-key access to records in a dynamically growing file. We specify here two algorithms and derive the average sizes of the corresponding directories. We provide an asymptotic analysis. The growth of the indexes appears to be non-linear for uniform distributions:O(v ^c ) orO(v ), wherec=1+b^–1, =1+(s-1)/(sb+1),s is the number of attributes being used,v the file size, andb the page capacity of the system. Finally we give corresponding results for biased distributions and compare transient phases.